RX4 Cyclone TFT Display User Manual

RX4 Cyclone TFT Display User Manual

Display Style Options

Display themes automatically adapt to lighting conditions via light sensors

Display Indicators Reference

Battery voltage - Flashes when voltage drops below 12V or exceeds 15V

Call notification - Flashes during incoming calls with caller ID display

Service reminder - First alert at 1500Km, then every 3000Km (Hold SELECT to reset)

Bluetooth connection - Gray: Disconnected, Blue: Connected (Device: CAR_BT)

Tire pressure monitor - Flashes when:
• Front: <200kPa or >300kPa
• Rear: <230kPa or >340kPa

Tire temperature - White: Normal
Red + Flashing : Alarm
Lines : No signal

Tire pressure alert - Activates with indicator #5/#6 alarms

Engine oil alert - Warns of low oil pressure/level

EFI fault - Electronic Fuel Injection system error

ABS alert - Anti-lock Braking System fault detected

MODE button (left) - Primary function control

SELECT button (right) - Secondary function control

Theme selector - Cycle through 5 color themes using SELECT button
• Default: Blue
• Settings persist after power-off

Button Operations Guide

Key: SP = Short Press (<2 sec), LP = Long Press (>2 sec)

Mileage Clearance

LP MODE button

Data Screen Cycling

SP MODE button to toggle between:
• Average fuel consumption
• Average speed
• Maximum speed

Reset Data Screens

Fuel consumption: LP SELECT while viewing
Average speed: LP SELECT while viewing
Maximum speed: LP SELECT while viewing

Maintenance Notification Reset

LP SELECT button during active notification flash

Unit Conversion (Metric/Imperial)

1. Turn ignition OFF
2. Hold SELECT button
3. Turn ignition ON
4. Release when display activates

Time Setting

A. LP both SELECT + MODE (hours will blink)
B. SP SELECT to choose hour/minute
C. SP MODE to adjust value
D. LP MODE for 12-hour format / LP SELECT for 24-hour
E. Auto-exits after 5 seconds inactivity

Theme Customization

SP SELECT to cycle through 5 color options
Continue pressing to toggle between motorcycle models
Settings saved permanently

Bluetooth Pairing

1. Enable phone Bluetooth
2. Search for "CAR_BT"
3. Connect - Icon turns blue when paired

TPMS Sensor Matching

1. Hold MODE 5s to enter TPMS mode
2. LP MODE to select front/rear wheel
3. Deflate tire within 60 seconds
4. Successful match = black wheel icon
5. Fail = gray icon (retry process)

Indicator Interpretation

Red numbers = Temperature/Pressure alert
Red label = Active alarm
Gray label = No signal
Black label = Normal operation

Click Here to View the Orignal PDF Manual