Testing Page.html

PROGRAMMING WIRELESS REMOTE CONTROL

• Step 1: Press the original remote control to remove the " " key, the horn rings twice, remove the alert, open the door lock to the " ON " position.
• Step 2: close the door lock to " OFF " file, about 5 seconds after the horn sound three sounds, operate the door lock from " OFF " and " ON " 5 times, the last time in " ON " file, horn sound 1, indicating that has entered the pairing mode.
• Note 1: The state of operating the electric door lock 5 times (from OFFON ¹ → OFF → ON ² → OFF → ON ³ → OFF → ON ⁴ → OFF → ON ⁵ Hold)
• Note 2: operate the door lock 5 times for at least the first time to fall in the three sounds.
• Step 3: Within 5 seconds of entering the pairing mode, press the required pairing remote control to unlock the " " key, and the horn rings 1, indicating that the currently pressed remote-control pairs successfully. Pairing successfully or timeout automatically exits the pairing mode.
• Note 1: Press the remote control that needs to be paired separately.
• Note 2: The paired PKE remote control shall be operated within the sensing range.
• Note 1: Enter the pairing mode; all the original remote controls are lost Loss or failure and cannot be paired.
• Note 2: One host can be equipped with up to two remote controls.