Classic Car & Truck

1" Open Square Phenolic Carburetor, Holley Style

This is For A BRAND NEW 1" Phenolic Plastic Carb Spacer And Stud Kit For 4150 Series CarbsFits Holley, Edelbrock, Barry Grant (Demon), Chevy, Ford, Mopar and any other square bore carburetorKeeps Heat Out Of The Carburetor And Gets More Horsepower1"...

1" Phenolic Carburetor Spacer Kit for Holley 4500 Dominator - Drag Race, Hot Rod

Drag Race Carburetor Spacer Kit 1" for 4500 Series Holley - New Boost your drag race performance with this carburetor spacer kit that isolates your carburetor from the manifold and prevents heat transfer. This kit also increases the distance from the...

1" Phenolic Carburetor Spacer, Quadrajet 4-BBL Hole Ported w/ Gaskets & Hardware

1" Phenolic Thermal Insulating Carburetor Spacer - Quadrajet 4-Hole This carburetor spacer uses a specially formulated phenolic compound that can reduce heat conductivity greater than 10 times that of aluminum. By reducing the fuel temperature inside...

1" Ported Phenolic Carburetor Spacer Fits Edelbrock Holley SBC BBC Chevy V8

1" Ported Square Phenolic Carburetor Spacer Fits Edelbrock Holley SBC BBC Chevy V8This is For A BRAND NEW 1" Phenolic Plastic Carb Spacer And Stud Kit For All Square Bore Carburetors. Fits Holley, Edelbrock, Barry Grant (Demon), Chevy, Ford, Mopar and...

1-1/4" OD Rubber Grommet w/ 1/4" Wide Groove, 1" ID For Steel V/C Breather, Pair

1-1/4" OD Rubber Grommet w/ 1/4" Wide Groove, 1" ID For Steel V/C Breather, PairExcellent replacement rubber grommets for your hot rod, rat rod, street rod, muscle car, truck project and more. These grommets fit 1-1/4" Holes and have 1/4" wide groves for...

1-1/4" OD Rubber Grommet w/ 1/4" Wide Groove, 3/4" ID For Steel V/C PCV, Each

1-1/4" OD Rubber Grommet w/ 1/4" Wide Groove, 3/4" ID For Steel V/C PCV, Pair Excellent replacement rubber grommets for your hot rod, rat rod, street rod, muscle car, truck project and more. These grommets fit 1-1/4" Holes and have 1/4" wide grooves for...

1-1/4" OD Rubber Grommet w/ 1/4" Wide Groove, 3/4" ID For Steel V/C PCV, Pair

1-1/4" OD Rubber Grommet w/ 1/4" Wide Groove, 3/4" ID For Steel V/C PCV, PairExcellent replacement rubber grommets for your hot rod, rat rod, street rod, muscle car, truck project and more. These grommets fit 1-1/4" Holes and have 1/4" wide grooves for...

1-1/8" Carb Carburetor Adapter Holley Rochester 2BBL to 4BBL Quadrajet 4 Barrel

1-1/8" Aluminum Carburetor Adapter Holley/Rochester 2BBL to Any 4BBL Q-Jet Spread Bore ManifoldThis is For A BRAND NEW Cast Aluminum Carburetor Adapter.  Adapts Holley 2BBL 350/500 / Rochester 4-bolt 2BBL base to any...

1/2" Air Cleaner Spacer Aluminum 5-1/8" Fits Edelbrock Holley Riser SBC BBC AFB

1/2" Air Cleaner Aluminum Spacer For 5-1/8" CarburetorsRaises your carburetor air cleaner opening by 1/2". Longer stud not included.Details:Machined Aluminum 1/2" Air Cleaner Spacer (1 inch pictured)Fits Carburetors with 5-1/8" OpeningWorks great with...

1/2" Carb Carburetor Adapter 2BBL Holley to 2 Barrel Rochester w/studs & gaskets

1/2" Aluminum Holley 2 Barrel To Rochester 4 Bolt 2 Barrel Carburetor AdapterThis is For A BRAND NEW Cast Aluminum Carburetor Adapter.  Adapts large Holley 2bbl to any Rochester 4-bolt, 2bbl base or any Rochester 4-bolt, 2bbl carb. to large...

1/2" NPT Pipe Fitting Plugs for Intake Water Pump Hot Rod, Street Rod, SBC, BBC

1/2" NPT Pipe Fitting Plugs for Intake Water Pump Hot Rod, Street Rod, SBC, BBC These 1/2" NPT pipe fitting plugs are designed to block off unused heater and sending unit ports on your intake manifold and water pump. They are made of durable steel and...

1/2" Phenolic Intake Manifold Heat Spacer Kit, Fits Ford Mustang 5.0 GT-40 87-93 5.0L

1/2" Phenolic Intake Manifold Heat Spacer KitCompatible with Ford Mustang 5.0 GT-40 Increases performance on your Mustang by getting cooler air in your intake. Increases torque, and increases valve cover clearance.Details:Compatible with Ford...